HVC_Knowledge_Base

What is the surge current rating of HVC screw terminal capacitors?

Views: ...

What is the surge current rating of HVC screw terminal capacitors?

HVC's HVCT8G screw terminal high voltage ceramic capacitors are rated for substantial surge current capability — typically supporting non-repetitive peak surge currents ranging from 500A to over 5,000A depending on capacitance value and voltage class, making them suitable for demanding pulsed-power applications.

HVCT8G Variant	Capacitance Range	Rated Surge Current (IFSM)	Pulse Width	Repetition Rate
Low-C (280pF – 560pF)	Small disc	500A – 1,000A	≤ 10μs	Non-repetitive
Mid-C (680pF – 2.2nF)	Medium disc	1,000A – 2,500A	≤ 10μs	Non-repetitive
High-C (2.7nF – 4.7nF)	Large disc	2,500A – 5,000A+	≤ 10μs	Non-repetitive
Special High-Pulse	Custom	Up to 10,000A	≤ 5μs	Per application spec
Test Parameter	Standard Condition	HVC Tested Condition	Margin
Ambient Temperature	25°C ± 5°C	-55°C ~ +125°C full range	✅ Wider
Pre-conditioning	None required	100 thermal cycles	✅ More rigorous
Surge Waveform	Exponential decay	Simulated actual load waveform	✅ Realistic
Pass Criteria	No visible damage, parameters within tolerance	Full re-test after 10x surge cycles	✅ Stricter
Post-Surge DF Change	Not always specified	ΔDF < +0.05% absolute	✅ Quantified
Operating Scenario	Derating Factor	Example (Rated 3000A surge)
Single event (rare)	1.0 (no derating)	Use up to 3,000A
Occasional (<1/hr)	0.7	Max 2,100A per pulse
Regular (1-10 Hz PRF)	0.5	Max 1,500A per pulse
Continuous high-PRF (>10 Hz)	0.3 or custom analysis	Max 900A; consider thermal modeling